How To Install the New Front Laser Light for the INNOVA Longarm Quilting Machines

Did you know that you can now have a laser light on the FRONT of the Innova Longarm AND the back?  Now it is possible with the new front laser light.  

Just another way that INNOVA is innovative! 

​ACC1198 Mini Needle Laser Light
Please note that a Spectre LED Light assembly is required to use ACC1198 Mini Needle Laser Light.

Directions to install the Spectre LED should be followed before attempting to install this item.
​
Step 1: Remove the set screw from the threaded hole on the left side of the Spectre LED.

​Step 2: Install one of the provided shorter set screws in to the threaded hole on the left side of the Spectre LED and tighten it firmly. 

​Step 3: Attach the Mini Needle Laser Light bracket on to the left side of the Spectre Led using the provided Phillips head screw.

Step 4: Install the laser in to the laser mount. Gently tighten the screw on the mount to hold the laser.

Step 5: Connect the 2.5mm plug to the power receptacle, Y-splitter or Tri-splitter on the left side of the top beam.

Step 6: Turn ON the machine.

Step 7: Align the Mini Needle Laser Light to shine directly through the needle hole of the needle plate.

​Step 8: Tighten all the screws on the Mini Needle Laser Light to maintain position. 

​If you have any questions or issues in installing the front laser light, please call any of our stores.
We will be happy to help!